VMPET Film

• Industrial Use: Food
• Transparency: Opaque
• Layered: Functional Layer
• Hardness: Soft
• Basic Level: BOPET
• Heat Seal: LLDPE
• Model NO.: vmpet film
• Functional Layer: VMPET
• Packaging: Bag
• Bag Sealing Methods: Flat Bag Packaging
• Packing Materials: Composite Films
• Transport Package: EPE Foam, Then Waterproof Fabric Packed.
• Specification: CE, BV, SGS, etc.
• Trademark: TJGH
• Origin: Tianjin
• HS Code: 3920620001
• Production Capacity: 500 Tons Each Month

Product Description

VMPET Film

1. Light weight, good flexibility
2. Pet metallized film+PE
3. Can used for laminated with EPE foam

Pet metallized film+PE
1. The structure of two layers metalized PET laminated PE
2. Color: Red, silvery, blue, green, purple, gold, pink
3. Width: 1000mm to 1500mm
4. Length: 2000m to 3000m per coil, also according to the clients' request
5. ID: 3 inch OD: 20~23 inch
6. Thickness: 8micron, 10micron, 12micron
7. The weight of PE is 12 to 25 GSM
8. Characteristic: Reflective that its reflectivity up to 97% radiant energy, sunshine, heat insulation, waterproof, good heat-sealing, super barrier-oxygen
9. This product is widely used in sun shade, sand beach mat, laminated with EPE foam, coated woven fabric

CERTIFICATE OF ANALYSIS
TIANJIN TEDA GANGHUA TRADE CO.,LTD
ROOM 1401,BUILDING 2,BEICHEN TOWER, BEICHEN DISTRICT, TIANJIN,  CHINA
TEL: [phone]
FAX: [phone]  P.C.:300400
Sort	VMPET Film	Production Date		2011-4-28
Supplier		Sample Weight ( KG )		245.7
Number		Inspection Date		2011-4-30
Spec.	12 Micron	Test	02	Result	A Grade
NO.	Properties	Unit	Standand Values		Test Values
1	Film Thickness Tolerance	%	12μm	±10%	12.00
2	Tensile Strength            MD	Mpa	≥	200	238.00
	Tensile Strength            TD		≥	200	235.00
3	Elongation at Break      MD	%	≥	80	96.00
	Elongation at Break      TD		≥	80	93.00
4	Heat Shrinkage(150ºC/30min)  MD	%	≥	3	2.30
	Heat Shrinkage(150ºC/30min)  TD			2	1.60
5	Wetting Tension	mN/m	≥	40	68.00
6	Vapor Permeation Flux	g/m2.24h	≤	0.5	0.40
7	Oxygen Permeation Flux cm3/(m2.24h.0.1MPa)			15	11.00
8	Strong adhesive strength	%	≤	20	13.00
9	Aluminum-plate thickness	ø	≤	2.50	2.47
10	Aluminum-plate equlity	%	±	15	12.00
11	Width  tolerance	mm	≤	3	1.00
12	Longth  tolerance	m	≥	80	80
13	Joint	Unit/roll	≤	1	0