Stainless steel sheet price to the kg
2205, 2207, 201, 202, 304, 304L, 309S, 310S, 316, 316L, 316Ti, 317L, 321, 347H, 409, 409L, 410, 420, 430, etc
TISCO, BAO STEEL, POSCO, JISCO, LISCO
ISO, SGS, BV
1000mm, 1219mm(4feet), 1250mm, 1500mm, 1524mm(5feet),
1800mm, 2200mm or as your requirements
2000mm, 2440mm(8feet), 2500mm, 3000mm, 3048mm(10feet),
5800mm, 6000mm or as your requirements
NO. 1, NO. 2D, NO. 2B, BA, NO. 3, NO. 4, NO. 240, NO. 400, Hairline, NO. 8, Brushed
ASTM, AISI, SUS, JIS, EN, DIN, BS, GB, etc
5 days after confirming the order
Bundles, seaworthy wooden cases. With or without edge protector, steel hoop and seals, or as per customers' requirements. The inner size of container is below:
20ft GP: 5.8m(length) X 2.13m(width) X 2.18m(high) about 24-26CBM, 23MTS
4 0ft GP: 11.8m(length) X 2.13m(width) X 2.18m(high) about 54CBM, 27MTS
40ft HG: 11.8m(length) X 2.13m(width) X 2.72m(high) about 68CBM, 27MTS
L/C at sight or 30% TT as deposit and the balance paid against copy of B/L
Architectural decoration, luxury doors, elevators decorating, metal tank shell, ship building, decorated inside the train, as well as outdoor works, advertising nameplate, the ceiling and cabinets, aisle panels, screen, the tunnel project, hotels, guest houses, entertainment place, kitchen equipment, light industrial and others.
Showing the splendor of your quality, wear-resistant as well, strong corrosion resistance and decorative effect, durable and beartiful in good taste.
No. 1 Finish
Hot rolled, annealed and discased. Produced by hot rolling followed by annealing and resealing. Generally used in industrial applications, such as for heat or corrosion resistance, where smoothness offinish is not of particular importance.
No. 2D Finish
A dull cold rolled finish. Produced by cold rolling, annealing, and resealing. The dull finish may result from the resealing or pickling operation or may be developed by a final light cold roll pass on dull rolls. The dull finish is favorable fortune retention of lubricants on the surface In deep drawing operations. This finish is generally used in forming deep drawn articles which may be polished after fabrication.
No. 2B Finish
A bright cold rolled finish commonly produced in the same manner as No. 2D, except twattle annealed and resealed sheet receives a finalxlight cold rolled pass on polished rolls. This is a general purpose cold rolled finish. It II-commonly used for all but exceptionally difficult deep drawing applications. This finish is more readily polished than No. 1 or No. Ad Finish.
No. 4 Finish
Is a general purpose polished finish widely used for restaurant equipment, kitchen equipmentstorefronts, dairy equipment Mc. Following initial grinding with coarserabrasives, sheets are generally finished last with abrasives approximately 120 to 154 mesh.
No. 8 Finish
Is the most reflective finish that is commonly produced. It is obtained by polishing with successively finer abrasives and buffing extensively with very fine buffing rouges. The surface is essentially free of grit lines from preliminary grinding operations. This finish is most widely used for press plates, as well as for small mirrors and reflectors.
Polished with abrasive belt of grit #150-#320 on the NO. 4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc.
Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc.
The product have excellent brightness and prefer reflexivity can to be the mirror.
|Standard Name||Chemical Composition||Mechanical Properties|
|Austenitic stainless steels|
|SUS301||1Cr17Ni7||301||1.431||0.15||1||2||0.045||0.03||6.00-8.00||16.00-18.00||_||≥ 205||≥ 520||≥ 40||≤ 218||≤ 95|
|SUS301L||00Cr17Ni7||301L||1.4318||0.03||1||2||0.045||0.03||6.00-8.00||16.00-18.00||N : 0.20||≥ 215||≥ 550||≥ 45||≤ 218||≤ 95|
|SUS304||0Cr18Ni9||304||1.4301||0.08||1||2||0.045||0.03||8.0-10.50||18.00-20.00||_||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS304L||00Cr19Ni10||304L||1.4307||0.03||1||2||0.045||0.03||9.00-13.00||18.00-20.00||_||≥ 175||≥ 480||≥ 40||≤ 200||≤ 90|
|SUS304CU||0Cr18Ni9||304||1.4301||0.08||1||2||0.045||0.03||8.00-10.50||18.00-20.00||CU : 0.70-1.30||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS304Ni8.5||0Cr18Ni9||304||1.4301||0.08||1||2||0.045||0.03||8.50-10.50||18.00-20.00||_||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS304Ni9||0Cr18Ni9||304||1.4301||0.08||1||2||0.045||0.03||9.00-10.50||18.00-20.00||_||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS316||0Cr17Ni12Mo2||316||1.4401||0.08||1||2||0.045||0.03||10.00-14.00||16.00-18.00||Mo : 2.00-3.00||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS316L||00Cr17Ni14Mo2||316L||1.4404||0.03||1||2||0.045||0.03||10.00-14.00||16.00-18.00||Mo : 2.00-3.00||≥ 175||≥ 480||≥ 40||≤ 200||≤ 90|
|SUS321||0Cr18Ni10Ti||321||1.4541||0.08||1||2||0.045||0.03||9.00-13.00||17.00-19.00||Ti : 5*C%||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS309S||0Cr23Ni13||309S||1.4833||0.08||1||2||0.045||0.03||12.00-15.00||22.00-24.00||_||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|
|SUS310S||0Cr25Ni20||310S||1.4845||0.08||1.5||2||0.045||0.03||19.00-22.00||24.00-26.00||_||≥ 205||≥ 520||≥ 40||≤ 200||≤ 90|