| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1060 2014 2024 2A12 5052 5083 6061 7075 T6 Condition Aluminum Board Plate Sheet
Aluminum and its alloys are today considered one of the most practical of metals for a variety of reasons. Its low cost, light-weight, and modern appearance are among the primary reasons for its widespread use. It is non-sparking, electrically conductive, thermally conductive, non-magnetic, reflective, and chemically resistant. It is popular in the construction, marine and aircraft industries because of its ease of fabrication, non-toxicity, strength (pound-for pound), and resistance to the corrosive atmospheres of industry and marine environments. Anodizing increases this corrosion resistance and also permits iridescent finishes in different colors. Some alloys are slightly corrosive and so are cladded with a thin layer of aluminum for added protection
1050/1060/1100
Being commercially pure aluminum, has excellent forming qualities and work-hardens more slowly than other alloys. As it is soft and ductile, most often employed where structural strength is not a primary requirement. It is extremely resistant to corrosion, and therefore finds excellent utilization in the chemical, cookware, and food processing industries. It is a non-heat treatable alloy. Of all aluminum alloys, its thermal and electrical conductivity is the highest. Its weldability is second to none and it is commonly employed in the architectural field and building trades.
Applications
Reflectors, cooking utensils and kitchenware, decorative parts, giftware, dials, name-plates, tank cars, storage tanks, chemical equipment, sheet metal work, heat exchangers, and etc.
3003 aluminum possesses the same basic characteristics and composition of 1100, with the exception of a greater percentage of manganese added to 3003. This addition increases the strength of this alloy by some 20% over that of commercially pure aluminum (1100), It has excellent workability, weld ability and resistance to corrosion. It may be deep drawn or spun, brazed or welded. This non-heat treatable alloy is among the most commonly used alloys in industry today.
Applications
Drawn and spun parts, ductwork, general sheet metal work, cooking utensils, awnings and sidings, decorative trim, garage doors, chemical equipment, pressure vessels, heat exchangers, and etc.
5052 is extremely resistant to corrosion, particularly that of a marine environment. It also possesses a high magnesium content, making it the highest strength non-heat treatable alloy available. It has good finishing characteristics, and excellent workability. It is easily drawn or welded, and may be formed into intricate shapes.
Applications
Sheet metal parts, aircraft components and tubes, small boats, tankage, bus and truck bodies, kitchen cabinets, cookware, appliances, fencing, fan blades, food-processing equipment, and etc.
5083 belongs to al-MG series alloy, which is widely used, especially in construction industry. It is the most promising alloy.Good corrosion resistance, good weldability, good cold processing, and has medium strength.The main alloy element of 5083 is magnesium, with good forming processing performance, corrosion resistance, weldability, medium strength, used for the manufacture of aircraft fuel tank, oil pipe, as well as traffic vehicles, ships of the sheet metal parts, instruments, street lamp bracket and rivets, hardware products, electrical shell, etc.
6061
Combines most of the good qualities of aluminum. It possesses high strength, high resistance to corrosion, good workability, and a wide range of mechanical properties. It is the least expensive and most versatile of the heat treatable alloys. 6061 in the annealed condition offers excellent weldability and formability, and is readily disposed to furnace brazing. It can be clad to offer higher corrosion resistance. 6061-T6 plate is ASME Unfired Pressure Vessel Code approved.
Applications
Marine equipment, boats, truck and bus bodies, tankage and-tank fittings, structural components, screw machine parts, high pressure applications, mine skips, transmission towers, moldings, pipes, and etc.
1. Other information
| Alloy No. | Thickness | Width | Length | Temper | ||
| (mm) | (mm) | (mm) | ||||
| A1050,A1060, A1070,A1100 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18, H24,H26,etc | ||
| A3003,A3105,A3004 | 0.2-100 | 20-2200 | 20-8000 | O,H14,H18,H24,etc | ||
| A5052 ,A5005,A5083,A5754 | 0.2-100 | 20-2200 | 20-8000 | O,H18,H24,H32,H34,H111,H112 ,etc | ||
| A6061,A6082,A6063 | 0.2-200 | 20-2200 | 20-8000 | T4,T6, T651,etc | ||
| A8011 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18,H24,H26, etc | ||
| Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP | ||||||
| The inner size of container is below: | ||||||
| 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,23MTS | ||||||
| 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS | ||||||
| 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS | ||||||
| Standards:ASTM-B209. EN573-1, GB/T3880.1-2006 | ||||||
| Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
||||||
| Application : Mainly used insigns, billboards, building exterior decoration, bus body, highrise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
||||||
| MOQ: 1 ton | ||||||
| Payment term:L/C at sight or 30% TT as deposit and the balance paid against copy of B/L. | ||||||
| Delivery Time: Immediately from stock. | ||||||
| Kind attention: Specifications can be customized as the customer's requirements. | ||||||
2. Product Pictures 
Packing: waterproof paper + pallet
Warehouse
Product Description of aluminium plate
| Division | Description | Application | Feature |
| 1000 SERIES | 1050 1060 1070 1100 1235representative series aluminum plate is also known as pure aluminum, in the series in 1xxx series belongs to all the alumina quantity of a maximum number of series. Purity can achieve 99.00% above | Utensil, decoration, Reflecting plate, printing plate, heatproof plate,cookware | Easy to process and weld,resistant to rust,high,conductibility of electricity and heat,low strength |
| 3000 SERIES | 3xxx series aluminum represents 3003 3004,3005, 3 A21 primarily. And can be called in the 3xxx series aluminum antirust aluminum production process more outstanding. The 3xxx series aluminum plate is by manganese as the main component. Content at 1.0-1.5 between. Is a rust-proof function better series. Conventional application in the air conditioning, the refrigerator, such as car in damp environment | Utensil(F/P, inside of rice cooker), aluminum can,material for interior and exterior of building,chemical equipment,Cellular Phone | 20% higher strength than the 1100 series, easily welded and brazed, good antirust,ability Non-heat treatable |
| 5000 SERIES | 5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features for low density, high tensile strength, elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series. | Ship board heatproof apparatus, material for interior and exterior of building, Parts of Electronic tools.Automobile Components | Excellent corrosion resistance andweld ability together with Easy to process and weld and superior hardness &heatproof Can be anodized for increased corrosion resistance |
| 6000 SERIES | 6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series and the advantages of the 5000 series 6061 is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications. | IT equipment & facility, Mould material, motor material, automatic line, machine & plant etc |
Easy to process , good corrosion resistance, high toughness and processed without distortion after heat-treatable, superior surface treatment |
| 8000 SERIES | 8xxx series is relatively commonly used for 8011 belongs to other series. It is for major function cap of aluminum, also used in the radiator, most applications for the aluminum foil | Kitchen utensils,Bottle cap | 8000 series is durable to process with special alloy |
){kind=link}