| Customization: | Available |
|---|---|
| Type: | Stainless Steel Sheets |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
300 Series stainless steels are classified as austenitic, and are hardenable only by cold working methods. These grades of stainless have chromium (approx. 18 to 30%) and nickel (approx. 6 to 20%) as their major alloying additions. Type 304 is the most widely used alloy of all stainless steels. 300 Series Stainless steel alloys resist corrosion, maintain their strength at high temperatures and are easy to maintain.
Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type 304/304L is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, and to many chemicals and food and beverages. These grades can be specified in the annealed condition where they have very good formability. Higher nickel versions can be specified to enhance multi-stage deep drawing characteristics. Higher strength, cold-worked conditions can also be specified for Type 304/304L for spring type applications. Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working.
Type 304L can be dual certified as 304 when the composition meets the lower carbon limit of 304L and the slightly higher strength levels of 304. Type 304L should be specified for welded applications as the low carbon version eliminates chromium carbide precipitation and enhances the corrosion resistance in the as-welded condition.
| Product Name | stainless steel sheet |
| Thickness | Cold-rolled stainless steel: 0.1-6mm
Hot-rolled stainless steel: 3-20mm
|
| Width | 60mm-2000mm |
| Length | as requirement |
| Surface | BA/2B/NO.4/8K/HL WITH OR WITHOUT pvd COLOUR |
| Payment terms | L/C T/T (30%DEPOSIT) |
| Stock or not | enough stock |
| Sample | Provided Freely |
| MTC | Mill Test Certificate is supplied with shipment, Third Part Inspection is acceptable |
| Container Size | 20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC: 12032mm(Lengh)x2352mm(Width)x2698mm(High) |
| Delivery time | Within 7-10 Working Days |
|
Finish
|
Thickness
|
Characteristics
|
Applications
|
|
No. 1
|
3.0mm~50.0mm
|
Finished by hot-rolling, annealing and pickling, characterized by white pickled surface
|
Chemical industry equipment, Industrial tanks
|
|
No. 2B
|
0.3mm~6.0mm
|
Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface
|
General Application Medical Instruments,Tableware
|
|
No. BA (Bright Annealed)
|
0.5mm~2.0mm
|
Bright heat treatment after cold rolling
|
Kitchen utensil, kitchen ware,architectural purpose
|
|
No. 4
|
0.4mm~3.0mm
|
Polishing with No. 150 to No.180 mesh abrasivesThe most popular finishes
|
Milk & Food processing acilities, Hospital Equipment, Bath-tub
|
|
No. 8
|
0.5mm~2.0mm
|
A mirror-like reflective surface by polishing with finer abrasives over 800 mesh
|
Reflector, Mirror, Interior-Exterior decoration forbuilding
|
|
HL(Hair Line)
|
0.4mm~3.0mm
|
Finished by continuous linear polishing
|
Architectural purposes, escalators, kitchen ware vehicles
|
){kind=link}