|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Color: | Silver |
| Application: | Transportation Tools |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
5005 Material Introduction
5005 aluminum sheet is magnesium aluminum alloy plate sheet and the strength of the equivalent of 3003, welding, good work-ability, the aluminum alloy is similar to the 3003, with medium strength and good corrosion resistance. The anodic oxide film of 5005 aluminum sheet is brighter than the 3003 alloy, and is consistent with the tone of the 6063 alloy.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5005
Aluminium Plate sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final product: Cookware, instrument shell, building decoration, high end curtain wall board, etc..
5052 Material Introduction
5052 Aluminum Alloy plate sheet belongs to Al-Mg alloy, cold forming has good processing performance, processing performance, good corrosion resistance, rust proof aluminum alloy 5052 is a most widely used, this alloy has high strength, especially the anti fatigue strength, ductility and high corrosion resistance, in the semi cold hard plastic is good, do not 5052 alloy used for the internal pressure of the beverage cover, the status of H19 material, do first oxidation treatment to improve coating adhesion and corrosion resistance, both sides painted after the tank cover forming processing, my company production of 5052 alloy lid material with good surface quality, stable performance.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5052
Aluminum Plate sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final usage:Aluminum plate for oxidation, marine sheet metal parts, chemical oil storage device
5083 Material Introduction
5083 aluminum plate sheet belong to Al-Mg-Si alloy, the use of a wide range of. The application of 5083 aluminum plate belongs to the high-end field of aluminum processing industry. With the rapid development of domestic rail transit market and the arrival of the era of globalization, it has a huge market prospect. According to the market development of 5083 aluminum sheet and the demand of the light weight, the production of aluminum alloy sheet was increased, and the production process of aluminum alloy sheet was strictly controlled by 5083 aluminum alloy. Sure, the alloy casting process optimization, homogenization heat treatment and rolling, the 5083 ship Haomei with aluminum performance with foreign materials, to meet user requirements, especially to meet the increasing demand of aluminum processing, rail transportation, high-grade car complex parts such as marine, very broad prospects for application.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5083
Aluminium Plate Sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final product:
The outer plate, the bottom of the ship deck, welding plane plate, a tanker, oxygen generator tower etc.
5086 Material Introduction
Aluminum magnesium alloy and aluminum manganese alloy called antirust aluminum alloy components, because the two have increased their anti-corrosion properties, aluminum manganese alloy is 3003,3004,3105, aluminum magnesium alloy were 5005, 5252, 5251, 5050, 5052, 5754, 5083, 5056, 5086 aluminum plate and so on according to the level of the content of magnesium alloy.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5086
Aluminium Plate Sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final usage:Aircraft panels can be welded parts, refrigeration equipment, television tower, equipment, transportation equipment, etc.
5182 Material Introduction
5182 aluminum plate sheet belongs to Al-Mg-Si alloy, a wide range of applications, especially in the construction industry can not be separated from this alloy, is the most promising alloy. Good corrosion resistance, good weldability, good cold workability and medium strength. The main alloying elements for 5182 mg, and added a small amount of silicon, so the welding of 5182 aluminum sheet used in gas welding, argon arc welding, spot welding and seam welding performance are good.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5182
Aluminum Plate sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final Usage:The outer plate, the bottom side of the deck, refrigeration equipment, tanker, oxygen generator tower body
5454 Material Introduction
5454 aluminum plate sheet anti rust aluminum strength than 5052 aluminum plate is 20% higher, its characteristics roughly the same with 5154, but in the harsh environment corrosion resistance is better than 5154.
| Alloy | Temper | Thickness(mm) | width(mm) | length(mm) |
| 5454
Aluminum Plate sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final Usage: Pressure vessel, marine installation pipeline, automobile wheel, oil tank, etc.
5754 Material Introduction
5754 aluminum alloy plate sheet with moderate strength, excellent processing performance, good corrosion resistance, weldability and easy processing characteristics, is a typical alloy of Al Mg alloy. 5754 Aluminum Alloy plates sheets of different heat treatment condition is the automobile manufacturing industry (car door, mould, seals), main materials used for canning industry.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 5754
Aluminum Plate Sheet |
O,H12,H14, H16,H18,H19, H22,H24,H26, H28,H32,H34 H36,H38,H111, H112,H114,H 116,H321 |
0.15-600 | 20-2600 | 500-16000 |
Final Usage:Railway passenger car inside and outside the wall, floor, car plate, etc.
5005 5052 H16 H18 H26 H28 H34 H36 H38 H114 H116 temper Aluminum sheet plate
1100 Material Introduction
1100 aluminum plate sheet for industrial pure aluminum, aluminum content (mass fraction) of 99%, non heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density, good plasticity, and can be used to produce all kinds of aluminum, but the strength is low. Other processes are basically the same as 1050A. 1100 aluminum sheet commonly used to have good machining performance, high corrosion resistance, high strength does not need not see, such as video and chemical handling and storage equipment, sheet metal products, hardware, hollow spinning drawing goods welding key combination, reflector, nameplate.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 1100 aluminium sheet | O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H32,H34 H36,H38 |
0.2-4.5 | 100-2600 | 500-16000 |
Final product: Cooking utensils, building materials, heat exchanger, etc.
Other Specification
Standard: ASTM B209
Grade:
1XXX: 1050, 1060, 1070, 1100,1230 .
2XXX: 2014, 2024,2124, 2219.
3XXX: 3003, 3004,3005,3105.
4XXX: 4043
5XXX: 5005,5010,5050, 5052,5059,5083, 5086,5154,5252,5454,5754
6XXX: 6003,6061,6063,6082
7XXX: 7050,7075
8XXX: 8011,8079
Temper: O, H12, H14, H16, H18, H20,H22,H24,H26,H28,H32,H34,H36,H111,H112,H114,H116,H321,
F, T3,T4,T6,T651 etc.
1060 Material Introduction
1060 Aluminum plate sheet with aluminum content of up to 99.6%, also known as pure aluminum plate, 1060 aluminum plate sheet has a good elongation and tensile strength, fully able to meet the requirements of conventional processing (stamping, stretching) high formability (1060). 1060 Aluminum industry pure aluminum sheet plate, high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but the intensity is low, heat treatment can not enhance machinability is not good; can welding, welding and welding with hydrogen atoms, is not easy to bear all kinds of pressure brazing; processing and drawing, bending.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 1060 aluminum plate sheet | O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H32,H34 H36,H38 |
0.2-4.5 | 100-2600 | 500-16000 |
Final product: ACP base sheet, lamp material, capacitor shell, etc.
1100 Material Introduction
1100 aluminum plate sheet for industrial pure aluminum, aluminum content (mass fraction) of 99%, non heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density, good plasticity, and can be used to produce all kinds of aluminum, but the strength is low. Other processes are basically the same as 1050A. 1100 aluminum sheet commonly used to have good machining performance, high corrosion resistance, high strength does not need not see, such as video and chemical handling and storage equipment, sheet metal products, hardware, hollow spinning drawing goods welding key combination, reflector, nameplate.
| Alloy | Temper | Thickness(mm) | Width(mm) | Length(mm) |
| 1100 aluminium sheet | O,H12,H14,H16 H18,H19,H22,H24 H26,H28,H32,H34 H36,H38 |
0.2-4.5 | 100-2600 | 500-16000 |
Final product: Cooking utensils, building materials, heat exchanger, etc.
1050 H22 H24 H26 H28 H32 H34 H36 H38 Aluminum sheet
Other Specification
Standard: ASTM B209
Grade:
1XXX: 1050, 1060, 1070, 1100,1230 .
2XXX: 2014, 2024,2124, 2219.
3XXX: 3003, 3004,3005,3105.
4XXX: 4043
5XXX: 5005,5010,5050, 5052,5059,5083, 5086,5154,5252,5454,5754
6XXX: 6003,6061,6063,6082
7XXX: 7050,7075
8XXX: 8011,8079
Temper: O, H12, H14, H16, H18, H20,H22,H24,H26,H28,H32,H34,H36,H111,H112,H114,H116,H321,
F, T3,T4,T6,T651 etc.
Popular Size:
Popular Grade & Temper:1050 H14 / 1060 H24 / 1100 H24
3003 H14 / 3105 H22
5005 H14 / 5052 H32 / 5083 H321 / 5754 H114
6061 / 6063 / 7075 T6 / T651
Thickness: 0.2mm to 660mm
Width: 600mm to 2600mm (cold rolled), 1000mm to 4300mm (hot rolled)
Length: 600mm to 12000mm
Popular Size:
4 X 8 FT, 4 X 10 FT, 5 X 10 FT, 5 X 20 FT etc.
1000X2000MM,1200X2400MM,1220X2440MM,1250X2500MM,1500X3000MM.
Finish: matt, bright, mirror,color coating, hairline, satin, etching, perforated,checkered etc.
1050 H22 H24 H26 H28 H32 H34 H36 H38 Aluminum sheet
Other information
| Alloy No. | Thickness | Width | Length | Temper | ||
| (mm) | (mm) | (mm) | ||||
| A1050,A1060, A1070,A1100 | 0.2-600 | 20-2600 | 200-12000 | O,H12,H22,H14,H16,H18, H24,H26,etc | ||
| A3003,A3105,A3004 | 0.2-600 | 20-2600 | 200-12000 | O,H14,H18,H24,etc | ||
| A5052 ,A5005,A5083,A5754 | 0.2-600 | 20-2600 | 200-12000 | O,H18,H24,H32,H34,H111,H112 ,etc | ||
| A6061,A6082,A6063 | 0.2-600 | 20-2600 | 200-12000 | T4,T6, T651,etc | ||
| A7075 | 0.2-600 | 20-2600 | 200-12000 | O,H12,H22,H14,H16,H18,H24,H26, etc | ||
| Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP | ||||||
| The inner size of container is below: | ||||||
| 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,23MTS | ||||||
| 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS | ||||||
| 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS | ||||||
| Standards:ASTM-B209. EN573-1, GB/T3880.1-2006 | ||||||
| Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
||||||
| Application : Mainly used insigns, billboards, building exterior decoration, bus body, highrise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
||||||
| MOQ: 1 ton | ||||||
| Payment term:L/C at sight or 30% TT as deposit and the balance paid against copy of B/L. | ||||||
| Delivery Time: Immediately from stock. | ||||||
| Kind attention: Specifications can be customized as the customer's requirements. | ||||||
Product Description of aluminium plate
| Division | Description | Application | Feature |
| 1000 SERIES | 1050 1060 1070 1100 1235representative series aluminum plate is also known as pure aluminum, in the series in 1xxx series belongs to all the alumina quantity of a maximum number of series. Purity can achieve 99.00% above | Utensil, decoration, Reflecting plate, printing plate, heatproof plate,cookware | Easy to process and weld,resistant to rust,high,conductibility of electricity and heat,low strength |
| 3000 SERIES | 3xxx series aluminum represents 3003 3004,3005, 3 A21 primarily. And can be called in the 3xxx series aluminum antirust aluminum production process more outstanding. The 3xxx series aluminum plate is by manganese as the main component. Content at 1.0-1.5 between. Is a rust-proof function better series. Conventional application in the air conditioning, the refrigerator, such as car in damp environment | Utensil(F/P, inside of rice cooker), aluminum can,material for interior and exterior of building,chemical equipment,Cellular Phone | 20% higher strength than the 1100 series, easily welded and brazed, good antirust,ability Non-heat treatable |
| 5000 SERIES | 5xxx series representatives 5052 5005 5083,5754. The 5000 series aluminum alloy aluminum belong to the more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-5%. And can be called aluminum magnesium alloy. Key features for low density, high tensile strength, elongation rate is high. In the same area under the weight of the magnesium alloy aluminum less than other series. | Ship board heatproof apparatus, material for interior and exterior of building, Parts of Electronic tools.Automobile Components | Excellent corrosion resistance andweld ability together with Easy to process and weld and superior hardness &heatproof Can be anodized for increased corrosion resistance |
| 6000 SERIES | 6xxx series represents 6061 mainly contain magnesium and silicon of two elements, so focused on the 4000 series and the advantages of the 5000 series 6061 is a cold treatment aluminum forging products, apply to fight against corrosion, oxidizing demanding applications. | IT equipment & facility, Mould material, motor material, automatic line, machine & plant etc |
Easy to process , good corrosion resistance, high toughness and processed without distortion after heat-treatable, superior surface treatment |
| 8000 SERIES | 8xxx series is relatively commonly used for 8011 belongs to other series. It is for major function cap of aluminum, also used in the radiator, most applications for the aluminum foil | Kitchen utensils,Bottle cap | 8000 series is durable to process with special alloy |
){kind=link}