Aluminum alloy 5083 6061 aluminum sheet
Alloy No. |
Thickness |
Width |
Length |
Temper |
(mm) |
(mm) |
(mm) |
A1050,A1060, A1070,A1100 |
0.2-100 |
20-2200 |
20-8000 |
O,H12,H22,H14,H16,H18, H24,H26,etc |
A3003,A3105,A3004 |
0.2-100 |
20-2200 |
20-8000 |
O,H14,H18,H24,etc |
A5052 ,A5005,5082A5083,A5754 |
0.2-100 |
20-2200 |
20-8000 |
O,H18,H24,H32,H34,H111,H112 ,etc |
A6061,A6082,A6063 |
0.2-200 |
20-2200 |
20-8000 |
T4,T6, T651,etc |
A8011 |
0.2-100 |
20-2200 |
20-8000 |
O,H12,H22,H14,H16,H18,H24,H26, etc |
Packing :Export wooden pallets.The bundle wegiht not exceed 2MT.Loading:By 1x20GP. |
The inner size of container is below: |
20ft GP:5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,23MTS |
40ft GP:11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS |
40ft HG:11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS |
Standards:ASTM-B209.EN573-1, GB/T3880.1-2006 |
Quality of material:Totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
Application :Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
MOQ |
2.5 tons |
Payment term: |
L/C at sight or 30% TT as deposit and the balance paid against copy of B/L |
Delivery Time |
7 days after 30% TT payment or receiving L/C copy |
Kind attention:Specifications can be customized as the customer's requirements. |
5xxx series representatives 5052 5005 5083.The 5000 series aluminum alloy aluminum belong to the more commonly used series, the main elements for magnesium, with magnesium in the amount between 3-5%.And can be called aluminum magnesium alloy.Key features for low density, high tensile strength, elongation rate is high.In the same area under the weight of the magnesium alloy aluminum less than other series.Reason often used in aviation, such as airplane oil tank.In conventional industry application also more widely.Processing technology for slab continuous casting and rolling, belongs to the hot rolling aluminum plate series so can do deep processing of oxidation.In our 5000 series aluminum belong to one of the mature aluminum plate series.
5083 aluminum sheet
With excellent corrosion resistance and weldability, together with high strength, this alloy was designed for welded structures requiring maximum joint strength and efficiency.Can be anodized for increased corrosion resistance, but does not lend itself to decorative applications.Not meant to be a machining alloy, but can be machined fairly well with proper preparations.Because of its relatively high magnesium content, the workability rating would only be fair.Non-heat treatable.Typical applications include large marine craft, containers, railroad cars, structurals and elevator cars.
Size:Thickness 0.08 ~ 500mm
Width:Max 2300 mm
Length:Max 11000 mm
Status:O, h112, t6 etc.
Contact details : Alice Miao
Tel : +86 22 86896631 605
Mob : +86 15122300587